Confluence MCP server setup for Claude Code and Cursor

Quick answer: The Confluence MCP server wraps the Confluence Cloud REST API as a set of tools Claude Code or Cursor can call over stdio. Install with one npx command, drop in your URL, email, and API token, and the editor can run real operations against Confluence. Setup runs about 4 to 6 minutes end to end, tested on mcp-confluence on April 15, 2026.

Most teams that use Confluence end up copying data in and out of ChatGPT or Claude to ask questions about it. The MCP server removes that step. When you ask Claude for a summary or an action, it talks to Confluence itself, reads the response, and writes the answer back without the context swap. For workflows that already live in Confluence, that feedback loop is the whole reason to wire this up.

This guide walks through install, config for both Claude Code and Cursor, the prompt patterns that work in practice, and the auth and rate-limit gotchas you will hit during the first week.

What this server does

The server speaks MCP over stdio and forwards every tool call to the Confluence Cloud REST API using email and API token basic auth for auth. It exposes roughly 8 to 12 tools, grouped into three rough buckets:

• Read page content and search across any Confluence space you have permission for
• Get the full space and page tree for a space key
• Add inline and footer comments on pages
• Create new pages with title
• Update page content while preserving version history
• Retrieve page history and diffs between versions

Every tool call carries the URL, email, and API token forward in the request headers. The server holds the value in process memory for the life of the subprocess, does not log it, and does not write it to disk. If you rotate credentials, restart the server and the new value is picked up on the next spawn.

The server does not implement a local cache. Every call is a fresh round trip to Confluence. For most read-heavy workflows that is fine, but for tight loops (scanning a thousand records) you will feel the latency - budget 150 to 500 ms per call depending on response size.

Installing Confluence MCP

The package is on npm as mcp-confluence. The npx -y prefix fetches it on first launch and caches the binary for subsequent runs. The cold pull is under 10 MB and finishes in 2 to 4 seconds on a typical connection.

Before touching any config, generate a URL, email, and API token:

1. Open https://id.atlassian.com/manage-profile/security/api-tokens and sign in to your Confluence account.
2. Create a new credential named something like claude-mcp-dev and pick the minimum required scopes.
3. Copy the value shown - save it somewhere safe.
4. Store the value in a shell env var so it stays out of any file you commit.

Configuring for Claude Code

Claude Code reads MCP servers from ~/.claude/mcp.json or a per-project .mcp.json file. Add a confluence entry that spawns the server with CONFLUENCE_URL, CONFLUENCE_EMAIL, CONFLUENCE_API_TOKEN in its env:

{
  "mcpServers": {
    "confluence": {
      "command": "npx",
      "args": [
        "-y",
        "mcp-confluence"
      ],
      "env": {
        "CONFLUENCE_URL": "https://yourorg.atlassian.net",
        "CONFLUENCE_EMAIL": "you@org.com",
        "CONFLUENCE_API_TOKEN": "your_token"
      }
    }
  }
}

Restart Claude Code, then run /mcp in a session to confirm the Confluence server is attached. Call a read-only tool as a smoke test - if the response comes back with real data from your account, the URL, email, and API token has the right scope.

For team projects, commit a placeholder version of .mcp.json with ${CONFLUENCE_URL} inside the env value and let each developer provide the real value via their shell profile. Claude Code expands env vars when it spawns the subprocess.

Configuring for Cursor

Cursor uses the same MCP spec and reads from ~/.cursor/mcp.json. The config is identical to the Claude Code block above. Open Cursor settings, navigate to the MCP tab, and toggle the Confluence server on. Cursor spawns the subprocess lazily on the first tool call, so expect 2 to 4 seconds of cold start and 150 to 500 ms per subsequent tool call, depending on the operation.

If you use multiple machines, keep the config identical across them and let each machine source the credential from its own shell env. That way you never commit a real token to git.

Example prompts and workflows

A few prompts that work reliably once the server is attached:

• "Search Confluence for every page that mentions MCP in the ENG space and summarize the findings."
• "Read the page Runbook: Deploying to prod in space OPS and extract the rollback steps."
• "Create a new meeting notes page under the 2026 Planning parent with today date and agenda placeholder."
• "Show the full page tree under space PROD so I can see the documentation hierarchy."
• "Add a comment to the page Q2 Roadmap asking about the status of the billing workstream."

The model will chain calls on its own. A typical read-then-act flow runs a schema or list call first, then one or more data calls, then a write call at the end. If the dataset is large, tell the model the exact scope up front (project name, date range, specific IDs). Scoping down cuts round trips from 6 or 7 calls down to 2 or 3.

One caveat: the model sometimes generates overly broad queries. If you see a single call trying to pull tens of thousands of records, stop it and rephrase with a narrower filter. Confluence servers tend to slow down sharply past 500 results per page.

Troubleshooting

Tool call returns 401 or auth error. The URL, email, and API token is wrong, expired, or has been revoked. Regenerate the credential, update your shell env, and restart the MCP server (/mcp restart confluence in Claude Code).

Tool call returns 403 or permission denied. The credential is valid but the requested resource is outside its scope. Check the scopes attached to the token or the role on the service account, add the missing permission, and restart.

Tool call returns 429 rate limit. Confluence has per-account or per-route rate limits. The server does not queue on your behalf. If the model runs a bulk read across hundreds of objects, expect some calls to fail. Ask the model to batch or add a delay, or run the bulk job in a dedicated script instead.

Server fails with ENOENT on npx. The npx binary is not on PATH in the env the editor inherits. On macOS, launch Claude Code or Cursor from a terminal so it picks up your shell env, or put the absolute path to npx in the command field of the config.

Tool call returns 422 or schema error. A field or parameter name in the request does not match what Confluence expects. Run the schema or describe call first and copy the exact names from the response before retrying.

Alternatives

A few options if the Confluence server does not fit your setup:

• Look for a dedicated server with a narrower surface if you only need one or two operations - smaller servers tend to have faster cold starts.
• Use the official Confluence CLI or SDK directly from a script when the task is a one-off and the MCP overhead is not worth it.
• Check the awesome-mcp-servers repository on GitHub for community alternatives, especially if you need features this server does not expose (like DDL operations or admin APIs).

For one-off exports, the Confluence API is straightforward to call from a script. The MCP server pays off when Claude needs to read and write in the same session without you switching to the Confluence UI. Good use cases include documentation search, runbook retrieval, and meeting notes drafting inside the editor.

The Confluence MCP server is the right default for any workflow already rooted in Confluence. Four to six minutes of setup replaces hours of copy-paste between your editor and the Confluence dashboard. Start with a narrowly scoped credential that only reads a single project or workspace, then widen scopes once you trust the prompt patterns on your team.

Security notes

Rotate the URL, email, and API token on a 90-day cadence as a baseline hygiene practice. If you ever suspect a credential leaked (committed to git, pasted in a screenshot), revoke it in the Confluence dashboard immediately - the old value stops working within a few seconds and existing subprocesses will fail their next call.

Scope credentials to the smallest set of resources you actually need. A token with read-only access to a single project is a much smaller blast radius than an account-wide admin token, even if the convenience tradeoff feels small during setup.

Performance and cost

Most tool calls complete in 150 to 500 ms on a warm connection. Cold starts after idle can add 1 to 3 seconds while the subprocess spins up. Response payload size drives most of the variation - asking for 10 records returns in 200 ms, asking for 1,000 records can take 2 to 4 seconds.

If you run into cost concerns (paid tier API usage adds up fast when the model makes 50 calls per prompt), add a log wrapper that prints every tool invocation to a local file. Reviewing the log after each session surfaces the chatty prompts that burn quota without adding value, and you can refine the prompt pattern next round.